Haase Plate Processor

Haase Plate Processor high speed plate processor for CTP polymer plates

                

 

The 0E40 is the high speed CTP plate processor for polymer plates.

Interfaces and bridges are available for all current plate setters.

The excellent pre-heat results are insured by the special HAASE hot air technology.

Together with a long developer bath we achieve highest plate throughput per hour.

working widths: 650 / 850 / 1050 / 1250 / 1450 mms
in. plate length: 290 mms

TECHNICAL FEATURES

Power Supply – 17KW Maximum, 380/415V (3 Phase, Neutral and Earth) Fuses: 3 x 32A (protection IP33)
Heat Output – 51500 BTU
Water Supply – ½” pipe with ¾” BSP fitting
Water Usage – The processor uses approx. 5 litres per plate max production based on 2–4 bar water pressure
Drainage – HT – pipes of PVC, 50mm Dia. The min. descent of the drainage must be 1 cm/m.
Working Widths – 650 / 850 / 1050 / 1250 / 1450 mm
Length – 1050 + 1750 mm = 2800 mm
Width – 1350 / 1550 / 1750 / 1950 / 2150 mm
Height – 1060 +/- 70 mm
Infeed Height – 900 +/- 70 mm
Outlet Height – 880 +/- 70 mm
Volume basin Developer – 71 / 92 / 108 / 125 / 141 litre
Volume developer tank – 103 / 129 / 155 / 180 / 206 litre (option)
Volume basin pre-wash – 37 / 48 / 58 / 67 / 76 litre (integrated water saving system)
Volume basin wash out – 30 / 37 / 44 / 51 / 58 litre (integrated water saving system)
Volume gum Tank – 15 Litres
Min. plate length – 290 mm